Notices

WARCRC > Anything Scaler > Scale Competitions and Gatherings TTC Top Truck Challenge 3/24/18 @ RC Hobbies Covington

Closed Thread
 
Thread Tools Display Modes
Old 02-01-2018, 01:51 PM   #11
justinart24
MOO!
 
justinart24's Avatar
 
Scaler
Join Date: Apr 2009
Location: Lake Stevens
Posts: 9,181
Default

Builder/Driver: Tim S.

Specs:

Full stainless tube chassis designed and built by me.

Narrowed Wraith axles, fully built with rear steer.

12t 550 Crawlmaster pro on 3 or 4s

Waterproof Holmes BRXL

7980 servo front 7950 rear

400oz servo winch on 12 volts

Full interior

Custom trans mount and t-case

Custom made 5.2" Rock Beast XL's

-50 point SORRCA Class 3 rig

I would like to be considered for the TTC because of many reasons. I love the competition, I think the TTC is one of the best and toughest competitions around, I've done at least 12 or 13 of them and have placed well every time, I love to spend time in Seattle and this will give me a reason to come up.



__________________
Check out the new WARCRC Facebook "Group": https://www.facebook.com/groups/WARCRCGROUP/
justinart24 is offline  
Old 02-12-2018, 10:51 PM   #12
justinart24
MOO!
 
justinart24's Avatar
 
Scaler
Join Date: Apr 2009
Location: Lake Stevens
Posts: 9,181
Default

Builder/Driver: Daneil A.

Hi,

Will bring the Military 6x6 TTC truck!

Specifications:
- 6x6 multi axle
- Proline TSL Swampers, 2.2" wheels
- AR60 Axles with extended scx10 frame rails
- scx10 skid, transmission, shock tower, etc
- front and rear bumper
- semi truck style cab with full bed, plenty of scale accessories, all custom made.
- Mamba Monster X brushless combo
- Engine sound system
- Rig Name: Perro Muerto

I should be voted into compete because It's always good to watch a 6x6 in action! And I'm ready to pull full throttle on this beast!

Thanks,
Daniel





__________________
Check out the new WARCRC Facebook "Group": https://www.facebook.com/groups/WARCRCGROUP/
justinart24 is offline  
Old 02-12-2018, 10:53 PM   #13
justinart24
MOO!
 
justinart24's Avatar
 
Scaler
Join Date: Apr 2009
Location: Lake Stevens
Posts: 9,181
Default

Driver/Builder: David R. SR.

Dave Rochon Sr,

WA, west side.

Why I should be chosen.

I built this truck last year for this purpose of Ttc. After attending last year's 2017 ttc I was hooked. Finish building the truck before axialfest 2017, drove the truck at axialfest 2017 through all the course average 150 and equaling 25miles. If I am chosen for the 2018 ttc, I will rep the Westside the best that I can and will go for broke.

Truck info:
Bentmetal mega truck chassis
Bentmetal eso cage
Proline F250 ext cab body
Full flat bed
Axial bomber trans with 2spd
Mips drivelines
Teambrood 2500kv 550 vigor
Tekin rs g2 esc
Vanquish wraith links
Axial ar60 equipped with beeftubes
Vanquish stage to axle kit
Over/under hd gears
Insicion spools
Axial cvds
Fanquish alloy beadlocks
2.2 proline xl tsl with ci single stage foams
Front PowerShift tech servo winch
Warn rc4wd rear winch
Proline interior with rc4wd driver(keith)
Blue bird servo steering servo
Powred by brood pure energy 3s and 4s batteries
All the necessary scale items to make the 40points scale point required.

Please choose me. Dave Rochon Sr





__________________
Check out the new WARCRC Facebook "Group": https://www.facebook.com/groups/WARCRCGROUP/
justinart24 is offline  
Old 02-12-2018, 10:57 PM   #14
justinart24
MOO!
 
justinart24's Avatar
 
Scaler
Join Date: Apr 2009
Location: Lake Stevens
Posts: 9,181
Default

Driver/Builder: Justinart24






__________________
Check out the new WARCRC Facebook "Group": https://www.facebook.com/groups/WARCRCGROUP/
justinart24 is offline  
Old 02-12-2018, 11:56 PM   #15
justinart24
MOO!
 
justinart24's Avatar
 
Scaler
Join Date: Apr 2009
Location: Lake Stevens
Posts: 9,181
Default

Driver/Builder: shane szczerba

Custom from the frame up.
Cut down NewBright CXT cab
Rear 5 link walking beam and 4 linked front
Wraith axle up front
3d printed XR width SCX centered BowHouse housings with axial internals. Rear steer (Hitec7955).
SCX Transmission
Custom welded MIPs drivelines
Big bore shocks
Tekin 1200kv brushless on 4s
Holmes Hobbies SHV500v2 servo and BR-XL ESC
3D printed wheels/hubs
CI DW Foams inside RC4WD Baja Claws

I would like to be considered to see how this 19lbs truck would fair on TTC courses. Iíll drive it until it breaks (besides the cab).



__________________
Check out the new WARCRC Facebook "Group": https://www.facebook.com/groups/WARCRCGROUP/
justinart24 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:41 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.